This affordable coastal cruiser has plenty of room for entertaining
T he Hunter design team was listening carefully to what potential buyers had in mind in the late 1990s when it came to building the ideal racer-cruiser, with an emphasis on the latter. The result was the Hunter 340, a sloop that would be fun to sail, comfortable and roomy enough for several friends or family, equipped with a gourmet galley, an enormous head and shower and suitable as a dockside summer gathering spot after a day on the water.
First impressions
It’s almost impossible not to notice the integrated arch looming large just forward of the spacious cockpit. The arch, which supports the traveler, is among several key innovations that created a buzz in the yachting community. The in-mast furling (a popular option) and absence of a backstay also get attention, as do the portals that are oddly configured in different shapes and sizes like a museum of windows.
And then there’s the massive cockpit, where a stainless 28-inch destroyer-style steering wheel is mounted to an instrument console with folding table, small cooler and storage compartment. There are two seats mounted on the stern rail, perfect perches from which to feel the wind and get the best view. The helmsman seat is hinged, making it possible to walk through the reverse transom to the integrated swim platform with its freshwater shower. Oh, and there’s no wood trim on deck, which translates to less seasonal maintenance.
Construction
The Hunter 340 is a fiberglass masthead sloop with a tall, fractional rig. It features a spade rudder and a bolted-on lead keel. Constructed by Hunter Marine from 1998 to 2001, the 340 was engineered to carry less weight aloft with smaller mast sections. This was accomplished by using swept spreaders and reverse diagonals as well as mast support struts, a system descending from the B&R design invented by the late Lars Bergstrom and Sven Ridder. The design eliminates the need for a backstay and allows for a large roach main to power the boat, while the 110-percent working jib provides stability. The drawback of swept spreaders is that they keep the main from being fully eased when sailing downwind.
The hull-to-deck joint is through-bolted and fitted with a continuous rubrail. The mast and boom are aluminum. Most deck fittings are stainless steel.
What to look for
Like any boat with a deck-stepped mast, excess compression over time and deck delamination from water infusion are problematic. The electrical system is, as one skipper put it, “bare bones” with few breakers and only one 30-amp shore power inlet. The swim platform opens to the bilge with only rubber latches to keep it secure, which could be a problem in rough seas. Some owners report thin line cracks on the hull bottom near the bolted-on keel. This most likely is fairing compound that overtime has become brittle and cracked as gravity and friction work against the keel. The keel was installed in bedding compound and then bolted. If weeping is evident, have the boatyard tighten the bolts. The boat’s gray nonskid deck paint tends to wear and peel.
The integrated arch accommodates the traveler, so there’s no need for the cockpit crew to move when tacking. Since the arch extends across much of the boat, the traveler can be longer and more efficient than those restricted by the width of the cockpit seats. It also protects the large cockpit from s flailing mainsheet and reduces overall line clutter. A bimini can be attached to the arch.
The arch was made with fiberglass on the 1998 and 1999 models, and changed to stainless steel in 2000 and 2001. Owners differ in opinion on whether the change was made to cut costs or improve aesthetics. Skippers also use the arch to mount speakers, line bags and other accessories.
The boat has plenty of cleats for docking, a bow pulpit, stern rail with two seats, double lifelines with gates, two dorade vents, hatches, an inboard jib track with cars, boom vang, roller furling jib, in-mast furling main, and stainless handrails. Mast shrouds connect to both the cabin exterior and the toerail, making it somewhat difficult for crew to make their way forward to handle foredeck tasks. The walk-through transom provides easy access to the integrated swim platform with its stainless, telescoping ladder.
The saloon affords 6 feet 4 inches of headroom. There’s a sprawling dining table for eight, and a gourmet galley with two-burner stove, oven, microwave, two-basin sink, refrigerator and freezer and Corian countertop. The boat carries 75 gallons of freshwater.
It sleeps seven: two in the V-berth, two in the aft cabin and three on the convertible dinette and settee. The head is designed with a large shower. Light and ventilation are plentiful via ports that open and are screened. The boat has multiple hatches. The enormous head has a full shower. There are two private staterooms and three hanging lockers.
The boat relies on a Japanese-built Yanmar 3GM diesel engine for auxiliary power. The engine is rated at 27-horsepower and is powerful enough to push the boat in a chop. The engine housing provides easy access to check fluids or change filters. The fuel tank holds 30 gallons.
Hunter Marine attempted to ease the effort of sail handling by using a large roach main. Although the sloop has a responsive helm, skippers have reported the combination of small genoa and big mainsail creates weather helm when sailing upwind, making it imperative to reef in 15 knots or more in order to balance the boat. Weather helm can also overpower the optional, battery-operated autopilot when the wind pipes up.
The jib sheet winches are on the cabintop rather than the coaming and can’t be reached from the helm, which makes the boat difficult to singlehand. Some 340s were made with only one winch on the starboard side, so it must be shared.
Owners note the typical upwind top speed is just over 7 knots. Although the Hunter 340 can be used for around-the-buoys racing, which it is in many locations, it’s more suitable as a coastal cruiser.
The Hunter 340 is a spacious, comfortable, innovatively designed sloop ideal for day sailing with several friends aboard or a weekend of coastal cruising.
SAILING’s Value Guide
(5-sailboat rating system)
PRICE: The price of a used Hunter 340 ranges from $40,000 to approximately $65,000 for a hull in good condition.
DESIGN QUALITY: The Hunter 340 was designed by the Hunter design team.
CONSTRUCTION QUALITY: The solid fiberglass boat is finished with a thick gelcoat. The hull-to-deck joint is through-bolted and trimmed with a continuous rubrail. Mast and boom are aluminum, the deck-stepped mast steadied by a series of support struts in addition to the shrouds. Hardware is stainless steel.
USER-FRIENDLINESS: The cockpit seats eight and is set up for socializing. The boat’s integrated arch supports the traveler. The boat isn’t easy to singlehand because the self-tailing winches aren’t mounted on the cockpit coamings and the traveler is bolted atop the arch.
SAFETY: The boat is equipped with double lifelines and gates, stainless handrails, swim platform to aid offloading by dinghy. The Edson steering wheel is a rod-and-arm system bolted directly to the rudder, which avoids use of quadrants and chain connections that are often a source of breakage.
TYPICAL CONDITION: The earliest models are just over 20 years old and owners say the hulls are holding up with no major defects or breakdowns. The gray nonskid deck tends to wear.
REFITTING: The boat could benefit from refitting, including adding a bowsprit, winches, sturdier latches on the swim platform lockers and installing an internal barrier inside the lockers. Some owners have added thick felt to the edges around inside of engine access panels to reduce noise and prevent rattles, and a sump pump so that the shower drains overboard and not into bilge.
SUPPORT: There are about 60 members throughout the United States, Canada and Australia in the Hunter 340 Facebook group. Many owners use the website https://hunter.sailboatowners.com when searching for parts or advice.
AVAILABILITY: At least ten Hunter 340s were for sale in the United States in early spring and other hulls were available in Canada and Turkey.
INVESTMENT AND RESALE: The Hunter 340 holds its value, with boats that sold as used 10 years ago for $50,000 still priced at approximately $45,000, depending on overall condition.
LOA 33’9”; LWL 28’6”; Beam 11’8”; Draft shoal 4’6”, deep 6’; Displ. 11,030 lb.; Ballast deep-draft 3,500 lb., shoal draft 4,100 lb.; Sail area 682 sq. ft.
General Market Price Data
$66,900 2001 Wisconsin
$52,500 1998 New York
$41,500 2000 Maryland
Also in Used Boat Notebook
- Hunter Vision 32
- Hunter Passage 42
- Pearson Rhodes 41
- Santa Cruz 52
- Allied Princess 36
Also from David Liscio
- Bargin Boats to Sail Now
- Chasing a dream
- The wide, wide world of multihulls
- Flares are expired. Now what?
- Saved from the scrap heap
- Forums New posts Unanswered threads Register Top Posts Email
- What's new New posts New Posts (legacy) Latest activity New media
- Media New media New comments
- Boat Info Downloads Weekly Quiz Topic FAQ 10000boatnames.com
- Classifieds Sell Your Boat Used Gear for Sale
- Parts General Marine Parts Hunter Beneteau Catalina MacGregor Oday
- Help Terms of Use Monday Mail Subscribe Monday Mail Unsubscribe
- Thread starter Walter59
- Start date Feb 26, 2015
- Hunter Owner Forums
I am looking at buying a Hunter 340 and I need some advise; Some of the 340s have solid supports from the deck to the mast, why and is this a option I should look for? Also some have fiberglass arches, which I do like that look and others have stainless steel, what are the pros and cons of each? The one that I like the most is a low time one owner 1998 model are there any problems with that year I should watch out for ? Thanks in advance for any advice, Walt
Don S/V ILLusion
There are 35 owner reviews under the "Boat Info" tab which should give you all the info you seek
The mast supports in conjunction with the shrouds to the swept back spreaders are there to substitute for no backstay. Not having a backstay allows for the fitting of a large roach main to drive the boat. The small working jib is there to provide stability. The B&R rig as it is known has proven to be safe and sound in thousands of boats in all kind of conditions. There is one drawback and it is that when running downwind it does not allow for the main to fully deployed as it will tend to sit on the swept back spreaders. The benefit of the arches is to locate the traveler where it belongs without interfering with the space in the cockpit. Some have radio speakers and also serves as support for the Bimini tops. As far as I'm concerned these design changes are very welcomed improvements. Another drawback of the new designs is that they tend to sail at anchor but that can be solved with the right tackle.
As Don said, lots of good reviews and info from owners here. http://hunter.sailboatowners.com/in...&Itemid=248&task=3&kb=1&model=32&brand=Hunter All the newer Hunters have the B&R rig without the additional support, so wouldn't worry if it had or didn't have it. They changed from fibreglass to stainless for cost? Each has worked well. Both could leak at the deck joint if not maintained and looked after.
I believe the "struts" on the mast are only on the boats with the non roller furling mainsail, the boats that have a roller furling mainsail do not have the struts. And I think all the Hunters with arches have fiberglass arches through the 1999 model year and they switched to stainless arches from 2000 on. I have a 2000 340 with a stainless arch and struts on the mast. And I love the boat, it's the perfect size for us and where we sail.
Ed Caldwell
Walter59 said: I am looking at buying a Hunter 340 and I need some advise; Some of the 340s have solid supports from the deck to the mast, why and is this a option I should look for? Also some have fiberglass arches, which I do like that look and others have stainless steel, what are the pros and cons of each? The one that I like the most is a low time one owner 1998 model are there any problems with that year I should watch out for ? Thanks in advance for any advice, Walt Click to expand
Many thanks to all for your advise
Ed, do you know if the 98's can be retro fitted with traveler lines inside the arch
Walt, read through this thread: http://forums.hunter.sailboatowners.com/showthread.php?t=162886
- This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register. By continuing to use this site, you are consenting to our use of cookies. Accept Learn more…
IMAGES