planos catamaran rc

Best RC Boat Plans

Immerse yourself in the exciting world of rc boat plans. .

A Voyage through RC Boat History

Since the earliest days of humankind, water vessels have captivated our imaginations. But in the last century, the thrill of sailing transitioned from vast open oceans to the comforts of our backyards with the evolution of Radio-Controlled (RC) boats . This shift marks an intriguing juncture in our maritime journey. Let’s embark on a voyage through the rich history of RC boats.

• The Dawn of Radio Control: Before RC boats could set sail, radio control technology needed to be invented and refined. The early 20th century saw the emergence of basic remote-controlled devices. As technology advanced post World War II, the application of radio control in hobbyist models began to gain traction.
• The 1950s – Birth of a Hobby:  By the 1950s, the basic principles of radio control were established, allowing enthusiasts to construct their transmitters, receivers, and servos. During this era, the first hobby-grade RC boats started to appear. These early models, often handcrafted from wood or metal, were powered by rudimentary electric or gas engines.
• The 1970s – Commercial Rise: With technological advancements and increasing interest, the 1970s marked a boom in the commercial availability of RC boats. Companies started producing ready-to-run models, kits, and accessories, making it easier for hobbyists to dive into RC boating.
• The 1980s and 90s The Golden Age: With the miniaturization of electronics and improvements in battery technology, the late 20th century was truly the golden age of RC boating. Boats became faster, more durable and even began to mimic real-life counterparts with astonishing accuracy. Racing competitions became popular, further fuelling the growth and innovation in the industry.
• 21st Century – Technological Renaissance: The turn of the century saw increased RC boat diversity. There was an RC model for every maritime enthusiast, from jet boats to sailboats, submarines to hovercrafts. Digital technology allowed for more precise controls, brushless motors offered greater power, and lithium batteries extended run times. Moreover, the advent of 3D printing has given hobbyists the freedom to craft custom parts, further pushing the boundaries of design and functionality.
• Today – A Community Afloat: RC boating is more than just a hobby—it’s a thriving community. Online forums, social media groups, and real-world meet-ups provide enthusiasts platforms to share designs and trade tips and celebrate the joy of sailing on a miniature scale.

In conclusion, the journey of RC boats mirrors the journey of human innovation. From humble beginnings to today’s sophisticated models, RC boats are a testament to our enduring fascination with water and our relentless pursuit of technological progress. As we look to the future, one can only imagine where the tides of innovation will take this beloved hobby next.

Crafting Your RC Boat: Beyond the Purchase

There’s an unmistakable charm in holding a sleek, miniature boat, knowing that you’ve created it. While the market is brimming with ready-to-sail RC boats , crafting your own has a deeper allure. Building an RC boat isn’t just about assembling parts; it’s about imprinting yourself in the creation. Let’s craft an RC boat, moving beyond just purchasing one off the shelf.

• The Thrill of Personal Touch: When you craft your RC boat, every curve, every paint stroke, and every tiny detail becomes an extension of your personality. It’s not merely an object; it’s a testament to your vision, patience, and craftsmanship. Manufacturers’ designs or color schemes do not limit you. Your boat, your rules.
• The Learning Curve: Beyond the allure of customization lies the rewarding challenge of the build. Understanding buoyancy dynamics, propulsion systems’ intricacies, or weight distribution nuances offers a hands-on educational experience. Every challenge faced and overcome adds to your repertoire of skills and knowledge.
• Economics of DIY: While investing in tools and materials might seem costly upfront compared to a ready-to-run model, DIY can be more economical in the long run. With the know-how, repairs, upgrades, or even fleet building becomes significantly cheaper.
• Unraveling Creativity: Crafting your boat gives you the canvas to experiment. Want a hybrid of a speedboat and a yacht? Or perhaps a unique paint job that’s never been seen before? When you’re the builder, the only limit is your imagination.
• Sustainability and Upcycling: DIY allows for sustainable choices. Old materials can find new life in your creations. That discarded piece of wood? It could be your boat’s deck. An old plastic container? It’s your boat’s hull waiting to be shaped.
• Emotional Bonding: The bond you share with something you’ve created from scratch is unparalleled. Every trial and error, every success and setback in the building process, weaves a unique story. The result is not just a boat; it’s a chronicle of your journey.
• Community Engagement: Building your RC boat opens doors to a vibrant community of like-minded enthusiasts. Sharing build logs, seeking advice, and showcasing your creation fosters connections, camaraderie, and collective growth.

While buying an RC boat offers instant gratification, building one provides a deeper, more enriching experience. It’s an endeavor that transcends the act of mere assembly. Crafting your RC boat is about embracing challenges, exploring creativity, and ultimately, basking in the unparalleled satisfaction of watching your vision come to life on the water. So, are you ready to set sail on this crafting adventure?

The Role of a Detailed Plan

A dream without a plan is just a wish. Understand the importance of a meticulous RC boat plan that serves as a roadmap, guiding hobbyists through every twist and turn of the boat-building journey, ensuring a masterpiece upon completion.

Understanding the Basics of RC Boats

Every journey begins with understanding the basics, and the world of RC boats is no different. Before delving into the complexities of RC boat plans , it’s essential to grasp what makes these miniature marvels tick.

The Essence of an RC Boat

Radio Controlled boats are more than just toys; they are a culmination of engineering, design, and passion. These miniature boats operated remotely offer hobbyists a chance to sail, race, and even perform stunts on water surfaces without actually being on the boat.

Core Components: From Hull to Rudder

The beauty of an RC boat lies in its components, each playing a pivotal role:

• Hull: The boat’s body design can vary based on the boat type, affecting its speed, stability, and overall performance.
• Motor: The heart of the RC boat. Depending on the model, it could be electric, nitro-powered, or gas-powered.
• Rudder: This steering device helps in navigating the boat. Positioned at the boat’s stern, it directs the water flow, guiding the boat’s direction.
• Propeller: Transforms the motor’s power into thrust, propelling the boat forward.
• Radio Transmitter and Receiver: The primary tools for communication. The transmitter sends signals, which the receiver on the boat catches, leading to action.
• Battery: Powers the motor and other electronic components. It determines the boat’s runtime.

Charting Different Waters: Types of RC Boat Plans

Just as in the real world, RC boats come in a variety of designs, each tailored for specific activities:

• Sailboats: Powered primarily by sails, they require a deep understanding of wind patterns.
• Racing Boats: Built for speed. They boast streamlined designs and powerful motors.
• Scale Boats: Miniature replicas of real-world boats, focusing on intricate details and aesthetics.
• Submarines: Yes, there are RC submarines too! Designed to dive and resurface, offering a unique experience.
• Tug Boats: Strong and sturdy, often used for pulling or pushing other boats.

By understanding these basics, you’re not just one step closer to building your own RC boat but also appreciating the intricate marvels of these miniature vessels.

Why Choose DIY RC Boat Plans?

While there’s no shortage of ready-to-sail RC boats on the market, the allure of crafting one from scratch is an unmatched experience. Let’s examine why   boat plans  are an irresistible choice for enthusiasts.

Crafting with Passion and Precision

Building an RC boat from a plan is not just assembling parts; it’s an artistic endeavor. It’s about:

• Involvement: Every cut, every screw, every adjustment—you’re involved in each step, understanding the nuances and intricacies of your boat.
• Learning Curve: With each challenge you face and overcome, you learn. Be it understanding materials, aerodynamics, or electronics, the learning never stops.
• Satisfaction: The sense of accomplishment when your handcrafted boat first hits the water is unparalleled. It’s a testament to your dedication and hard work.

The Uniqueness of Customization

When you choose a DIY approach:

• Personal Touch: Your boat will never be just another model. From color choices to design tweaks, it’ll reflect your personality.
• Modifications: Want a faster motor? A sleeker design? With DIY, you’re the master of modifications, not restricted by pre-made designs.
• Innovations: As you grow as a hobbyist, you can incorporate new technologies or features, making your boat a continuous creation project.

Saving Bucks: DIY vs. Pre-made Models

Beyond the passion and customization, there’s a practical advantage:

• Cost-Effective: Building from scratch can be more wallet-friendly. You decide where to splurge and where to save.
• Maintenance: Understanding your boat inside-out means you’re better equipped to handle repairs, potentially saving on maintenance costs.
• Upgrade Path: Instead of buying a new model for an upgrade, you can make incremental changes to your boat, spreading out costs and getting what you want.

In closing, choosing a DIY RC boat plan isn’t just about building a boat; it’s about creating an experience, memories, and skills that last a lifetime.

Essential Tools and Materials for Your RC Boat Blueprint

Crafting an RC boat from a blueprint isn’t just an exercise in creativity; it requires a precise set of tools and the right materials. Let’s break down what you’ll need to make your dream RC boat a reality.

Assembling Your Toolkit: Must-haves for Hobbyists

Before you embark on your boat-building journey, ensure you have these tools at your disposal:

• Cutting Tools: Precision knives, saws, and scissors are essential for detailed cuts.
• Measuring Tools: Rulers, calipers, and protractors to ensure exact dimensions.
• Soldering Kit : For connecting electronic components securely.
• Sandpaper : Different grits for smoothing surfaces.
• Clamps and Vices : To hold components securely during assembly or drying.
• Glues and Adhesives : Wood glue, epoxy, and super glue cater to bonding needs.
• Screwdrivers and Pliers : For those tiny screws and intricate fittings.
• Paint Brushes and Sprayers : For that impeccable finish.

Wood vs. Plastic: What Suits Your Vision?

The primary material you choose will define your boat’s aesthetics, performance, and durability:

• Pros: Offers a classic, authentic look. It’s also easy to shape and modify.
• Cons: Requires more maintenance to prevent water damage.
• Popular Choices: Balsa, plywood, and mahogany are among the favorites.
• Pros: Durable and resistant to water damage. Lightweight and versatile.
• Cons: It might lack the “authentic” feel of wood.
• Types: ABS plastic and polystyrene are commonly used.

Powering Your Craft: Motors and Electronics

The heart and brain of your RC boat:

• Motors: Choose based on desired speed and performance.
• Electric: Quiet and efficient, great for general use.
• Nitro: High-speed performance but requires fuel.
• Gas: Suitable for larger models, offers extended run time.
• Batteries: Capacity and type determine run time. LiPo batteries are famous for their power-to-weight ratio.
• Radio System: Consists of a transmitter (the remote) and a receiver (on the boat). Ensure they’re compatible.
• Servos: These convert radio signals into motion, controlling rudders and sails.

Safety First: Gearing Up Right

Safety is paramount, both during the building process and while sailing:

• Goggles: Protect your eyes from flying debris.
• Gloves: Safeguard against cuts and chemical exposures.
• Ventilation: When using adhesives or paint, ensure good airflow.
• Fire Safety: Especially important when soldering or working with electronics.
• First Aid Kit: For any minor injuries during the crafting process.
• Water Safety: Always retrieve your boat safely. Consider a retrieval boat or a fishing line.

Remember, while the right tools and materials are pivotal, your passion and commitment are crucial in building an RC boat. 

Dive into Popular RC Boat Plans for Hobbyists

Whether you’re just starting or have spent years mastering the art, an RC boat plan is tailored for you. Let’s explore options based on skill level, ensuring every hobbyist finds their perfect match.

Plans Tailored to Your Expertise

It’s essential to choose a plan that aligns with your expertise. Doing so not only ensures a smoother building process but also helps in mastering skills progressively.

Setting Sail: Beginner-Friendly Designs

Just dipping your toes in the RC boat world ? Here are designs tailored for newcomers:

• Simple Tugboats: Their sturdy design makes them forgiving for novices. They focus more on buoyancy and balance rather than speed.
• Basic Sailboats: Have a sail, a rudder, and a hull. These help beginners understand wind dynamics without the complexities of motors.
• Monohull Speedboats: While speed might be in the name, beginner versions are more about straight-line stability than breaking records.

Tip: Look for plans that prioritize minimal parts and straightforward assembly instructions.

Navigating Deeper Waters: Intermediate Plans

Once you’ve got the basics down, it’s time to challenge yourself a bit:

• Dual-Hull Catamarans: With two hulls, these boats offer better stability at higher speeds—a balance between complexity and performance.
• Scale Models: Replicas of real-world boats. While they might be simple in mechanics, the attention to detail can be a fun challenge.
• Nitro-powered Speedboats: Introducing a nitro engine adds complexity in both assembly and maintenance, perfect for hobbyists looking to level up.

Tip: At this stage, focus on plans that offer customization options, allowing you to tweak based on personal preferences.

The Captain’s Challenge: Advanced Blueprints

For those who’ve conquered the seas and are looking for their next big challenge:

• Detailed Warships: Not only do these require intricate detailing, but they also incorporate advanced features like firing cannons or rotating turrets.
• Submarines: The challenge here is not just in the build but also in mastering buoyancy and underwater navigation.
• Hydroplane Racers: These boats sit atop the water, making their dynamics and balance a real test for builders.

Tip: Advanced plans often assume a certain level of expertise.  Ensure you’re comfortable with terminology and techniques before diving in.

Choosing the right plan is crucial, but remember, the journey of building an RC boat is as rewarding as the destination. So, pick a blueprint that excites you and set sail on your boat-building adventure!

Step-by-Step Guide to Building Your Dream RC Boat

Building your RC boat is a journey; like all great journeys, it requires a roadmap. Here’s your step-by-step guide to ensure smooth sailing from start to finish.

Deciphering Your RC Boat Plan

Every great build starts with understanding the blueprint.

• Study the Plan: Before anything else, familiarize yourself with the overall design, components, and terminology.
• List Materials and Tools: List all materials you’ll need based on the plan. Ensure you also have the right tools.
• Understand the Sequence: Some plans have a specific sequence for better efficiency. It’s always good to follow the recommended order.

Crafting the Perfect Hull

It’s crucial to get this part right.

• Select Your Material: Be it wood or plastic, ensure it aligns with your vision and the boat’s purpose.
• Cutting and Shaping: Using the dimensions from your plan, begin cutting out the hull shape. Sand down edges for a smooth finish.
• Assembling the Hull: If your boat has multiple hull pieces, now’s the time to assemble. Use clamps to hold parts together while the adhesive dries.
• Reinforcing: Depending on the design, you might need to support the hull with internal ribs or bulkheads for added strength.

Power Dynamics: Motor and Electronics Installation

Your boat’s heart and brain come to life in this step.

• Selecting a Motor : Choose based on your boat’s size and desired speed. Electric motors are standard, but nitro and gas are options for speed enthusiasts.
• Mounting the Motor : Securely attach the motor to the hull, ensuring it aligns perfectly with the propeller’s location.
• Installing the Electronics : Place the receiver, ensuring it’s well-protected from water. Connect it to the motor and, if applicable, to the rudder servo.
• Testing : Before sealing everything up, run a quick test. Ensure the motor runs smoothly and that the rudder responds to the transmitter.

The Final Touch: Paint and Finish

It is where your boat truly comes to life aesthetically.

• Priming: Before painting, apply a primer. It ensures better paint adherence and offers additional protection to the hull.
• Painting: Choose paints suitable for your material. Consider using bright colors for visibility. Multiple thin coats often work best.
• Decorative Details: If you’re creating a scale model or want added flair, now’s the time to add decals or any other decorative details.
• Sealing: Once everything’s dry, apply a sealant to protect against water and UV damage. It enhances durability and ensures longevity.

With these steps, your dream RC boat should be ready to make waves. Remember, patience and precision are essential.

The success of your RC boat build lies not only in the core steps of the process but also in the finer details and approaches you adopt. Here are some tips to ensure your blueprint turns into a successful RC boat.

Tips to Ensure Your RC Boat Blueprint’s Success

While passion drives the creation of your RC boat, a few guiding principles can make the difference between a good boat and a great one.

Precision and Patience: Keys to Perfection

The meticulousness you put into your project defines its outcome:

• Double Check Measurements: Always measure twice and cut once. This age-old adage holds especially true for intricate builds like RC boats.
• Avoid Rushing: While eagerness to see the finished product is natural, rushing can lead to mistakes. Take your time, especially during crucial steps like gluing or electronics installation.
• Invest in Quality Tools: Quality tools lead to quality work. Ensure your tools are sharp, clean, and well-maintained.
• Seek Feedback: If you’re part of an RC hobbyist community, don’t hesitate to share your progress and ask for feedback. Fresh eyes can spot potential issues.

Testing the Waters: Functional and Buoyant Checks

Before you officially launch, a few tests can prevent potential mishaps:

• Dry Run:  Test all electronics outside of the water first. Ensure motors run and that the rudder responds to commands.
• Buoyancy Test:  Place the boat in shallow water to check its buoyancy. Ensure there are no leaks and it sits on the water as intended.
• Control Range Test: With your boat in water, test the range of your transmitter. Ensure you maintain control even at farther distances.
• Safety Check: Especially for speedboats, ensure all components are firmly attached, and there’s no risk of parts coming loose during operation.

Long Journeys: Maintenance for Longevity

Your boat’s lifespan depends on the care it receives:

• Regular Cleaning: After each use, clean your boat. Remove any debris, especially from the propeller and rudder.
• Dry Thoroughly: Ensure your boat is dry before storage to prevent mold or structural damage.
• Battery Care: If using rechargeable batteries, store them partially charged. Avoid over-discharging, and check for damage regularly.
• Inspect and Repair: Inspect your boat for damage, especially after accidents. Address any issues promptly.
• Update Components: As technology advances, consider updating parts of your boat, like the motor or radio system, for enhanced performance.

By following these tips and keeping a meticulous approach, your RC boat blueprint will come to life and sail smoothly for years. Enjoy the journey and the destination!

RC boat building can be as much about navigating through challenges as it is about the joy of the finished product. Let’s delve into some common issues hobbyists face and how to address them:

Navigating Challenges in RC Boat Building

Every project has its fair share of hurdles. Recognizing potential pitfalls and knowing how to overcome them can make your boat-building journey smoother.

Common Hiccups and Their Solutions

• Warped Materials: Especially with wood, warping can occur by storing materials flat and in a controlled environment. Gentle bending or weighting can help straighten things if you encounter minor distortion.
• Drying Delays: Sometimes, adhesives or paints take longer to dry. Always check manufacturer recommendations and be patient. If in a humid environment, consider using a dehumidifier.
• Electronics Failure: Always test electronics before integrating. Ensure there’s no water infiltration and connections are secure.

Mistakes in Plan Interpretation and Corrections

• Misreading Dimensions: Double-check all measurements against the plan before making cuts. If a piece is cut wrong, it’s often best to replace it rather than try to adapt it.
• Incorrect Sequence : If you realize you’ve missed a step or done things out of order, evaluate if it’s possible to revert. Sometimes, working backward can resolve the error without starting over.
• Overlooking Details: Always cross off steps as you go. If a detail needs to be included, see if it can be added later without disrupting the already-completed work.

Overcoming Assembly Bottlenecks

• Alignment Issues : If elements don’t align, check for warping or mistakes in cuts.
• Component Integration: Commercial components (like motors) may sometimes need a better fit. Consider slight modifications, but ensure you don’t compromise the component’s function.
• Difficulty in Securing Parts: Use clamps or weights to hold pieces in place as glues dry. Always ensure the workspace is level.

Troubleshooting 101: Addressing RC Boat Glitches

• Boat Doesn’t Respond: First, check the transmitter’s battery. Then, ensure the boat’s battery is charged, and connections are secure.
• Motor Runs but Boat Doesn’t Move:  Check the connection between the motor and propeller. Ensure there’s no debris caught in the propeller.
• Boat Lists or Sinks: Check for water in the hull. If there’s a leak, dry the boat and identify the source. Seal any gaps or holes.
• Loss of Signal at Short Distance: Ensure the receiver’s antenna isn’t damaged or submerged. Sometimes, interference from other electronics can be the culprit.

Remember, every challenge offers a learning opportunity. By methodically troubleshooting issues and seeking advice when needed, you’ll have a functional RC boat and gain a wealth of experience to apply in future projects. 

Building an RC boat is much more than just following instructions—it’s an artistic endeavor that marries precision, patience, and passion. Like every journey, it’s marked by challenges and joys. So, as we dock at the conclusion harbor, let’s reflect on what we’ve explored.

The Harbor of Satisfaction: Reflecting on Your Build

Completing an RC boat is an achievement that mirrors the countless hours spent refining, understanding, and creating. Your finished boat is a testament to your craftsmanship and your learning journey. Mistakes made along the way have transformed into invaluable lessons, and triumphs have become cherished memories.

Every time your boat slices through the water, it’s not just propelling forward; it’s carrying the weight of your dedication, echoing your problem-solving grit, and reflecting the beauty of your vision. It’s a piece of art, a science project, and a toy; all melded into one.

The Ever-evolving World of RC Boat Plans

The world of RC boats is ever-dynamic. With advancing technology and evolving design philosophies, new plans and models continually emerge, offering hobbyists endless avenues to explore. It ensures that the world of RC boat building remains fresh, exciting, and continuously challenging.

Whether you’re a beginner setting sail on your first project or a seasoned hobbyist who’s navigated many waters, there’s always a new horizon waiting. And with every new plan comes a fresh wave of learning, creativity, and satisfaction.

In essence, RC boat building is a confluence of art, science, and emotion. It’s not just about the destination but also the journey. As you stand at the shore, watching your creation glide seamlessly, remember it’s not just the boat that’s set sail but also a piece of your heart. Here’s to many more builds, many more sails, and many more stories! Safe and happy sailing!

Join Our Fleet of Passionate Boat Builders!

Your boat-building journey doesn’t have to end here. The most beautiful part of this hobby is the community we build around it. So, why sail solo when we can navigate the waters together?

• Share Your Blueprints : Have an RC boat plan that you’re proud of? A unique design or an innovative approach? Please share it with us! We’d love to see the diverse range of creative genius our readers bring.
• Chronicle Your Experiences: Whether it’s a challenging hiccup you overcame or a triumphant first sail, your stories can inspire, educate, and entertain fellow hobbyists.
• Personal Hacks and Tips: Discovered a shortcut? Found a unique material or method? Please share your hacks, and let’s all benefit from collective wisdom.

Engage, Discuss, Connect

The true essence of any hobby lies in its community. Let’s spark discussions, ask questions, seek advice, and celebrate achievements. Whether you’re an RC boat rookie or a seasoned sailor, your insights and inquiries add value.

Set Sail Together in Our Passionate Community

Remember, every boat tells a story, and every builder has the wisdom to share. By creating a space where we can collectively share our journeys, we’re not just building boats but making connections.

Click below to join our vibrant community, share your story, and embark on new adventures with fellow enthusiasts!

• Vanquish 65
• Mini Maniac
• RG65 Appendages
• Maniac MK II
• IOM Appendages
• Marblehead Class
• Marblehead Appendages
• RT65 Ragnarok
• RT65R Armageddon
• RC65 Adrenaline
• ST65 Sowelu
• Mini40 / F48 Class
• Nightmare X
• Nightmare MK VIII
• MultiOne Class
• FireDragon 1000
• DIY Sail Winch
• Rig Building

Click the pictures to expand

Browse the pictures using the slider, click the center picture to expand

Browse the pictures using the slider, click the center picture to view the video clip.

RC Boat Plans

Download rc boat plans for your next project here..

These RC boat plans are meant for scratch building radio controlled boats mainly from balsa and with a minimum of tools required.

RC Cabin Cruiser

Skill level: Easy

This RC boat plan is the first of a series I've decided to develop primarily with beginners in mind. To further lower the threshold to get into this amazing hobby I decided to lay the plan sheets out on regular office size paper. This should keep your printing cost to a minimum.

As a result the plan set is laid out on seven sheets total in PDF format. Five sheets are laid out 11x17 and two on 8 1/2x11. These sheets can also be printed on ISO size paper with no loss of information, just substitute A3 for 11x17, and A4 for 8 1/2x11. When printing ISO sizes, make sure to print the sheets "full size", as selected in your printer driver.

Picture below shows sheet two through four.

I'm currently in the process of writing build logs and instructions to help the novice and to clarify the intent of the plans. It's always difficult to convey all little nuances on the plans alone, although a lot is there and if you've built some models before, you may not really need much help. A list of the logs can be found at the bottom of this page as I complete them.

The hull design follows that of the PT 109 I developed earlier. From my own experience and the feedback I've received, it seems to be a very easy and straight-forward way to build with good results.

The seven-sheet plan set are available in a single zip file. They are as follows:

• Sheet one (11x17): Layout profile and general arrangement
• Sheet two (11x17): Miscellaneous hull templates (keel, deck etc)
• Sheet three (8 1/2x11): Bulkhead and transom templates
• Sheet four (11x17): Alignment aid for first stage of building the hull
• Sheet five (11x17): Superstructure (cabin) layout and templates
• Sheet six (11x17): Superstructure templates
• Sheet seven (8 1/2x11):Template for windshield frame

Please order below.

Price:

Elco PT 109

1:24 and 1:32 scale - follow this link., 1:16 scale - follow this link..

Introduction - list of materials, scope of project etc.

RC Boat Hull - part one - starting hull construction

RC Boat Hull - part two - adding deck, keel and lower bulkheads

Planking - sanding and planking the RC boat hull

RC Boat Motor Mount - some tips about motor installation

Finishing up the hull - adding rub and spray rail, hatch coaming etc

More to follow.

Simple RC model boat rudder

A complete list of PT 109 build logs is available (click the link).

Return to Model Boat Plans Store

Return from RC boat plans to Homepage

Would you prefer to share this page with others by linking to it?

• Click on the HTML link code below.
• Copy and paste it, adding a note of your own, into your blog, a Web page, forums, a blog comment, your Facebook account, or anywhere that someone would find this page valuable.
• Plans Store
• Model Boat Books
• Model Boats Intro
• Building Materials
• Make a Hull
• Plastic Kits

Radio Control

• US Battleships
• Torpedo Boats
• Model Boats Q&A
• Model Ship Gallery
• What's New?
• Privacy Policy

By  Petter Blix 

Copyright 2009-2018 Building-Model-Boats.com

Trademarks belong to their respective owners

All Rights Reserved

RC Wing Sail Catamaran

Introduction: RC Wing Sail Catamaran

This is a Wing Sail Catamaran project that I started over 6 years ago after seeing the new AC 45s introduced to the America's Cup races. The model uses PVC sheet, Carbon Fiber tubing and 377 Dupont Mylar to "skin" the wings. The "Cookie Cutter" construction technique allows me to make quick inexspensive changes to the design without having to scrap a model and start over, everything is tweekable. Two Catamaran models are shown here, but I have created a total of four boats during design development, one of which only sailed once,and poorly. But that one sailing taught me alot, and I started another boat the next day. It's not all about finishing one boat, it's about developing a Platform that can evolve as you learn.

Attachments

Sign In or Create Account

Forgot password.

If you don't receive the email within an hour (and you've checked your Spam folder), email us as [email protected].

Racing Sparrow Plans

Check out these plans and resources, ranging from a 375mm boat to a 1500mm yacht. Pair these with our eBook guide for a fast, easy, and affordable home build RC yacht.

RS-RG65 - 650mm plans, measures to international RG65 rules

A full forward hull and a straight stern. This boat has proven to be a very fast and competitive racer.

Free Book Sample - PDF

A few pages from the eBook absolutely free

Racing Sparrow 750 plans

The plans that come with the eBook.

Racing Sparrow 3D 760

A 3D printable version that is 760mm. STL files are available in the 3D printing section.

Racing Sparrow 1000 plans

A one metre version, scaled up lines. Bulkhead only plans. Look at the 750 for full schematics.

Racing Sparrow 1500 plans - A scaled up Racing Sparrow

A larger size model yacht. I haven't seen many of these surface. It's a good challenge to build.

Racing Sparrow 375 plans - The smallest sparrow

A miniature RacingSparrow. A great introduction to building with balsa.

RacingSparrow Footy plans

A double diagonal design footy from RacingSparrow.

Logos & Sticker Sheet

Downloadable logos and an EPS file to be sent to a printer and printed out on navy blue cutout vinyl.

Print Your Own Radio Controlled Yacht

Want to 3D Print a RacingSparrow? Well now you can. We offer a set of STL files and instructions.

We have been hard at work designing the original Racing Sparrow to be 3D printable.

It is so easy to print and build and sails really well. We are really happy with how it turned out.

Read more about the model on the   3D Printing page.

Common questions about the plans

What tools do i need to build a racingsparrow.

1. Chisel 2. Craft-knife 3. Drill Bit - 2mm (5/64in)bit 4. Drill Bit - 5mm (3/16in) bit 5. Electric Drill 6. Felt Marker 7. File 8. Hacksaw 9. Hammer 10. Hole Punch 11. Lighter 12. Pen 13. Pencil 14. Pins 15. Pliers 16. Ruler (steel) 17. Sanding Block 18. Scissors 19. Screwdriver 20. Spirit Level (optional) 21. Sponge Brush (several) 22. Vice Grips

Do I need the eBook to build this cool rc sailboat?

No you don't. The book is designed for the newcomer to model yacht building. The book does make it a much simpler process with every detail figured out and covered in the book. Seasoned builders can simply have a go with the free plans.

Are the plans really free?

Yes all the plans are free to download and use as you see fit. The most comprehensive plans are the RS750 A1 full size.

Are there CAD files or 3D files?

Yes there is a 3D printable version of the racing sparrow. Read the page about that model.

Builders eBook

Dive into the world of boat building with our eBook. Discover the craft of hull planking, fibreglass strengthening, and lead keel ballast casting.

Master the art of electrics installation, spray painting, sail making, and tuning of sails. Download a sample today and embark on a rewarding journey of boat construction.

What the builders and sailors say:

Being a complete novice, I purchased your book a couple of years ago and built two racing sparrows. Building on this experience I then went on to build, from scratch, an IOM (Triple Crown design). I've since joined a local club and sail virtually every weekend. I would just like to thank you for your endeavours which have allowed me to enter a world I never thought was in my reach.

John Sterland, Australia

Coming upon your book, "Build your own Radio Controlled Yacht" in the Napier Public Library, I am hugely impressed. The combination of your superb photos and illustrations with your easy writing style make it a standout publication and I hope it does well for you.

Richard Spence, New Zealand

Thanks for an excellent design in your RG65. I trialled her again today in a solid 20 knots gusting higher. Even so in a steep chop and fingers off the rudder she drove upwind remarkably well, balanced perfectly. Very impressed that a model boat can handle that with a large rig. I found the book excellent. Ive built several big boats, plus a few skiffs and without that resource building such a good boat would have been impossible.

Mike Bennett

Build It Yourself - Racing Sparrow

• PDF download
• Detailed plans
• Clear illustrations and photos
• Lists all tools & materials
• Shows centimeters & inches

Look at all these cool boats folk have made at home

There is also a full gallery with a boat load of photos of Racing Sparrow's

Peter Hill - RS750 , Henderson, Auckland

Dec 1, 2023

Eric Rosenbaum , USA

May 4, 2009

John Sterland , Australia

Dec 28, 2011

Mike Wilson's - RS1000 moulded hull and deck , Gold Coast, Australia

Nov 15, 2013

'Sparrow' based RG 65

May 2, 2020

DKM247 - Proud RacingSparrow Builder/Owner , Melbourne, Australia

Dec 1, 2016

Andrew Scott - RS1000 , Ayrshire, Scotland

Jun 9, 2010

Graham Long , Auckland, New Zealand

Dec 17, 2009

Racing Sparrow #3 - rigging , Auckland, New Zealand

Apr 1, 2004

Jerry Cashman's RS750 , Canberra, Australia

Nov 26, 2022

Hello! Here a couple of pix of my Sparrow. She’s been finished for a year or so now but the lockdowns has kept her out of the water largely.

She’s a beaut. Sails beautifully on just the lightest air. Thanks for the design! 

Roextended Project

The Home of Roextended Project

Skip to content

• Quick links
• Board index Mods - Present your work Fixes and RC's for other maps
• It is currently Mon Oct 28, 2024 4:43 pm
• All times are UTC

Moscow and Kovrov Road Connection v0.1 [1.48-1.49]

Post by Bozo » Sun Sep 17, 2023 2:08 pm

Re: Moscow and Kovrov Road Connection v0.1 [1.48]

Post by Tapir » Sun Sep 17, 2023 2:29 pm

Post by Tapir » Sun Sep 17, 2023 4:32 pm

Post by Bozo » Sun Sep 17, 2023 4:39 pm

Post by Tapir » Sun Sep 17, 2023 4:42 pm

Post by baneorthodox » Sun Sep 17, 2023 6:21 pm

Post by Tapir » Sun Sep 17, 2023 7:59 pm

Post by Vinnie Terranova » Sun Sep 17, 2023 8:40 pm

Post by Tapir » Sun Sep 17, 2023 8:52 pm

Post by bogdac » Mon Sep 18, 2023 8:19 am

Return to “Fixes and RC's for other maps”

• Roextended Map - Developement, News
• The City - Developement, News
• Download Area - Get your files here
• Mod Manager Order - Map Combo's
• Mods - Present your work
• ↳   Trucks
• ↳   Maps
• ↳   Trailers
• ↳   Other mods
• ↳   Fixes and RC's for other maps
• Help! Troubleshooting - Crashes, Problems - post HERE!
• ETS2 Map Editor - Tutorials, advices
• Tweaking and Enhancing the Game - Make your game better
• American Truck Simulator - All things ATS related
• ↳   Mods
• ↳   Combo
• ↳   RCs&Fix
• ↳   General
• Board index

Powered by phpBB ® Forum Software © phpBB Limited

Style by Arty - Update phpBB 3.2 by MrGaby

Privacy | Terms

Evolution Reflections

• Classifieds
• Remember Me Forgot Password?
•   Boats Racing Boats - Electric Build Log Mystic C5000R scratch build

• Electric Flight
• Advertising
• Our Sponsors
• Review Policies
• Terms of Service
• Privacy Policy
• Site History
• Mark Forums Read
• Member Search
• Upcoming Articles
• Do Not Sell My Data
• Manage Consent
• Back to Top