3 mast sailboat

Guide to Understanding Sail Rig Types (with Pictures)

There are a lot of different sail rig types and it can be difficult to remember what's what. So I've come up with a system. Let me explain it in this article.

What are the different types of sail rig? The sail rig is determined by the number of masts and the layout and shape of sails. Most modern ships are fore-and-aft rigged, while old ships are square-rigged. Rigs with one mast are sloops and cutters. Ketches, yawls, brigs, and schooners have two masts. Barques have three masts. Rigs can contain up to seven masts.

'Yeah, that's a gaff brig, and that a Bermuda cutter' - If you don't know what this means (neither did I) and want to know what to call a two-masted ship with a square-rigged mainsail, this article is definitely for you.

On this page:

More info on sail rig types, mast configurations and rig types, rigs with one mast, rigs with two masts, rigs with three masts, related questions.

This article is part 2 of my series on sails and rig types. Part 1 is all about the different types of sails. If you want to know everything there is to know about sails once and for all, I really recommend you read it. It gives a good overview of sail types and is easy to understand.

The Ultimate Guide to Sail Types and Rigs (with Pictures)

First of all, what is a sail rig? A sail rig is the way in which the sails are attached to the mast(s). In other words, it's the setup or configuration of the sailboat. The rig consists of the sail and mast hardware. The sail rig and sail type are both part of the sail plan. We usually use the sail rig type to refer to the type of boat.

Let's start by taking a look at the most commonly used modern sail rigs. Don't worry if you don't exactly understand what's going on. At the end of this article, you'll understand everything about rig types.

The sail rig and sail plan are often used interchangeably. When we talk of the sail rig we usually mean the sail plan . Although they are not quite the same. A sail plan is the set of drawings by the naval architect that shows the different combinations of sails and how they are set up for different weather conditions. For example a light air sail plan, storm sail plan, and the working sail plan (which is used most of the time).

So let's take a look at the three things that make up the sail plan.

The 3 things that make up the sail plan

I want to do a quick recap of my previous article. A sail plan is made up of:

• Mast configuration - refers to the number of masts and where they are placed
• Sail type - refers to the sail shape and functionality
• Rig type - refers to the way these sails are set up on your boat

I'll explore the most common rig types in detail later in this post. I've also added pictures to learn to recognize them more easily. ( Click here to skip to the section with pictures ).

How to recognize the sail plan?

So how do you know what kind of boat you're dealing with? If you want to determine what the rig type of a boat is, you need to look at these three things:

• Check the number of masts, and how they are set up.
• You look at the type of sails used (the shape of the sails, how many there are, and what functionality they have).
• And you have to determine the rig type, which means the way the sails are set up.

Below I'll explain each of these factors in more detail.

The most common rig types on sailboats

To give you an idea of the most-used sail rigs, I'll quickly summarize some sail plans below and mention the three things that make up their sail plan.

• Bermuda sloop - one mast, one mainsail, one headsail, fore-and-aft rigged
• Gaff cutter - one mast, one mainsail, two staysails, fore-and-aft rigged
• Gaff schooner - two-masted (foremast), two mainsails, staysails, fore-and-aft rigged
• Gaff ketch - two-masted (mizzen), two mainsails, staysails, fore-and-aft rigged
• Full-rigged ship or tall ship - three or more masts, mainsail on each mast, staysails, square-rigged

The first word is the shape and rigging of the mainsail. So this is the way the sail is attached to the mast. I'll go into this later on. The second word refers to the mast setup and amount of sails used.

Most sailboats are Bermuda sloops. Gaff-rigged sails are mostly found on older, classic boats. Square-rigged sails are generally not used anymore.

But first I want to discuss the three factors that make up the sail plan in more detail.

Ways to rig sails

There are basically two ways to rig sails:

• From side to side, called Square-rigged sails - the classic pirate sails
• From front to back, called Fore-and-aft rigged sails - the modern sail rig

Almost all boats are fore-and-aft rigged nowadays.

Square sails are good for running downwind, but they're pretty useless when you're on an upwind tack. These sails were used on Viking longships, for example. Their boats were quicker downwind than the boats with fore-and-aft rigged sails, but they didn't handle as well.

The Arabs first used fore-and-aft rigged sails, making them quicker in difficult wind conditions.

Quick recap from part 1: the reason most boats are fore-and-aft rigged today is the increased maneuverability of this configuration. A square-rigged ship is only good for downwind runs, but a fore-and-aft rigged ship can sail close to the wind, using the lift to move forward.

The way the sails are attached to the mast determines the shape of the sail. The square-rigged sails are always attached the same way to the mast. The fore-and-aft rig, however, has a lot of variations.

The three main sail rigs are:

• Bermuda rig - most used - has a three-sided (triangular) mainsail
• Gaff rig - has a four-sided mainsail, the head of the mainsail is guided by a gaff
• Lateen rig - has a three-sided (triangular) mainsail on a long yard

The Bermuda is the most used, the gaff is a bit old-fashioned, and the lateen rig is outdated (about a thousand years). Lateen rigs were used by the Moors. The Bermuda rig is actually based on the Lateen rig (the Dutch got inspired by the Moors).

Other rig types that are not very common anymore are:

• Junk rig - has horizontal battens to control the sail
• Settee rig - Lateen with the front corner cut off
• Crabclaw rig

Mast configuration

Okay, we know the shape of the mainsail. Now it's time to take a look at the mast configuration. The first thing is the number of masts:

• one-masted boats
• two-masted boats
• three-masted boats
• four masts or up
• full or ship-rigged boats - also called 'ships' or 'tall ships'

I've briefly mentioned the one and two mast configurations in part 1 of this article. In this part, I'll also go over the three-masted configurations, and the tall ships as well.

A boat with one mast has a straightforward configuration because there's just one mast. You can choose to carry more sails or less, but that's about it.

A boat with two masts or more gets interesting. When you add a mast, it means you have to decide where to put the extra mast: in front, or in back of the mainmast. You can also choose whether or not the extra mast will carry an extra mainsail. The placement and size of the extra mast are important in determining what kind of boat we're dealing with. So you start by locating the largest mast, which is always the mainmast.

From front to back: the first mast is called the foremast. The middle mast is called the mainmast. And the rear mast is called the mizzenmast.

What is the mizzenmast? The mizzenmast is the aft-most (rear) mast on a sailboat with three or more masts or the mast behind the mainmast on a boat with two masts. The mizzenmast carries the mizzen sail. On a two-masted boat, the mizzenmast is always (slightly) smaller than the mainmast. What is the purpose of the mizzen sail? The mizzen sail provides more sail area and flexibility in sail plan. It can be used as a big wind rudder, helping the sailor to have more control over the stern of the ship. It pushes the stern away from the wind and forces the bow in the opposite way. This may help to bring the bow into the wind when at anchor.

I always look at the number of masts first, because this is the easiest to spot. So to make this stuff more easy to understand, I've divided up the rig types based on the number of masts below.

Why would you want more masts and sail anyways?

Good question. The biggest advantage of two masts compared to one (let's say a ketch compared to a sloop), is that it allows you to use multiple smaller sails to get the same sail area. It also allows for shorter masts.

This means you reduce the stress on the rigging and the masts, which makes the ketch rig safer and less prone to wear and tear. It also doesn't capsize as quickly. So there are a couple of real advantages of a ketch rig over a sloop rig.

In the case of one mast, we look at the number of sails it carries.

Boats with one mast can have either one sail, two sails, or three or more sails.

Most single-masted boats are sloops, which means one mast with two sails (mainsail + headsail). The extra sail increases maneuverability. The mainsail gives you control over the stern, while the headsail gives you control over the bow.

Sailor tip: you steer a boat using its sails, not using its rudder.

The one-masted rigs are:

• Cat - one mast, one sail
• Sloop - one mast, two sails
• Cutter - one mast, three or more sails

The cat is the simplest sail plan and has one mast with one sail. It's easy to handle alone, so it's very popular as a fishing boat. Most (very) small sailboats are catboats, like the Sunfish, and many Laser varieties. But it has a limited sail area and doesn't give you the control and options you have with more sails.

The most common sail plan is the sloop. It has one mast and two sails: the main and headsail. Most sloops have a Bermuda mainsail. It's one of the best racing rigs because it's able to sail very close to the wind (also called 'weatherly'). It's one of the fastest rig types for upwind sailing.

It's a simple sail plan that allows for high performance, and you can sail it short-handed. That's why most sailboats you see today are (Bermuda) sloops.

This rig is also called the Marconi rig, and it was developed by a Dutch Bermudian (or a Bermudian Dutchman) - someone from Holland who lived on Bermuda.

A cutter has three or more sails. Usually, the sail plan looks a lot like the sloop, but it has three headsails instead of one. Naval cutters can carry up to 6 sails.

Cutters have larger sail area, so they are better in light air. The partition of the sail area into more smaller sails give you more control in heavier winds as well. Cutters are considered better for bluewater sailing than sloops (although sloops will do fine also). But the additional sails just give you a bit more to play with.

Two-masted boats can have an extra mast in front or behind the mainmast. If the extra mast is behind (aft of) the mainmast, it's called a mizzenmast . If it's in front of the mainmast, it's called a foremast .

If you look at a boat with two masts and it has a foremast, it's most likely either a schooner or a brig. It's easy to recognize a foremast: the foremast is smaller than the aft mast.

If the aft mast is smaller than the front mast, it is a sail plan with a mizzenmast. That means the extra mast has been placed at the back of the boat. In this case, the front mast isn't the foremast, but the mainmast. Boats with two masts that have a mizzenmast are most likely a yawl or ketch.

The two-masted rigs are:

• Lugger - two masts (mizzen), with lugsail (a cross between gaff rig and lateen rig) on both masts
• Yawl - two masts (mizzen), fore-and-aft rigged on both masts. Main mast is much taller than mizzen. Mizzen without a mainsail.
• Ketch - two masts (mizzen), fore-and-aft rigged on both masts. Main mast with only slightly smaller mizzen. Mizzen has mainsail.
• Schooner - two masts (foremast), generally gaff rig on both masts. Main mast with only slightly smaller foremast. Sometimes build with three masts, up to seven in the age of sail.
• Bilander - two masts (foremast). Has a lateen-rigged mainsail and square-rigged sails on the foremast and topsails.
• Brig - two masts (foremast), partially square-rigged. The main mast carries small lateen-rigged sail.

The yawl has two masts that are fore-and-aft rigged and a mizzenmast. The mizzenmast is much shorter than the mainmast, and it doesn't carry a mainsail. The mizzenmast is located aft of the rudder and is mainly used to increase helm balance.

A ketch has two masts that are fore-and-aft rigged. The extra mast is a mizzenmast. It's nearly as tall as the mainmast and carries a mainsail. Usually, the mainsails of the ketch are gaff-rigged, but there are Bermuda-rigged ketches too. The mizzenmast is located in front of the rudder instead of aft, as on the yawl.

The function of the ketch's mizzen sail is different from that of the yawl. It's actually used to drive the boat forward, and the mizzen sail, together with the headsail, are sufficient to sail the ketch. The mizzen sail on a yawl can't really drive the boat forward.

Schooners have two masts that are fore-and-aft rigged. The extra mast is a foremast which is generally smaller than the mainmast, but it does carry a mainsail. Schooners are also built with a lot more masts, up to seven (not anymore). The schooner's mainsails are generally gaff-rigged.

The schooner is easy to sail but not very fast. It handles easier than a sloop, except for upwind, and it's only because of better technology that sloops are now more popular than the schooner.

The brig has two masts. The foremast is always square-rigged. The mainmast can be square-rigged or is partially square-rigged. Some brigs carry a lateen mainsail on the mainmast, with square-rigged topsails.

Some variations on the brig are:

Brigantine - two masts (foremast), partially square-rigged. Mainmast carries no square-rigged mainsail.

Hermaphrodite brig - also called half brig or schooner brig. Has two masts (foremast), partially square-rigged. Mainmast carries a gaff rig mainsail and topsail, making it half schooner.

Three-masted boats are mostly barques or schooners. Sometimes sail plans with two masts are used with more masts.

The three-masted rigs are:

• Barque - three masts, fore, and mainmast are square-rigged, the mizzenmast is usually gaff-rigged. All masts carry mainsail.
• Barquentine - three masts, foremast is square-rigged, the main and mizzenmast are fore-and-aft rigged. Also called the schooner barque.
• Polacca - three masts, foremast is square-rigged, the main and mizzenmast are lateen-rigged.
• Xebec - three masts, all masts are lateen-rigged.

A barque has three or four masts. The fore and mainmast are square-rigged, and the mizzen fore-and-aft, usually gaff-rigged. Carries a mainsail on each mast, but the mainsail shape differs per mast (square or gaff). Barques were built with up to five masts. Four-masted barques were quite common.

Barques were a good alternative to full-rigged ships because they require a lot fewer sailors. But they were also slower. Very popular rig for ocean crossings, so a great rig for merchants who travel long distances and don't want 30 - 50 sailors to run their ship.

Barquentine

The barquentine usually has three masts. The foremast is square-rigged and the main and mizzenmast fore-and-aft. The rear masts are usually gaff-rigged.

Faster than a barque or a schooner, but the performance is worse than both.

The polacca or polacre rig has three masts with a square-rigged foremast. The main and mizzenmast are lateen-rigged. Beautiful boat to see. Polacca literally means 'Polish' (it's Italian). It was a popular rig type in the Mediterranean in the 17th century. It looks like the xebec, which has three lateen-rigged masts.

Fun fact: polaccas were used by a Dutch sailor-turned-Turkish-pirate (called Murat Reis).

The xebec is a Mediterranean trading ship with three masts. All masts are lateen-rigged. I couldn't find any surviving xebecs, only models and paintings. So I guess this rig is outdated a long time.

A boat with three or more masts that all carry square-rigged sails is called a ship, a tall ship, or a full-rigged ship. So it's at this point that we start calling boats 'ships'. It has nothing to do with size but with the type of rigging.

More sails mean less stress on all of them. These ships use a lot of sails to distribute the forces, which reduces the stress on the rigging and the masts. Square sails mean double the sail area in comparison to triangular sails.

They are quite fast for their size, and they could outrun most sloops and schooners (schooners were relatively a lot heavier). The reason is that tall ships could be a lot longer than sloops, giving them a lot of extra hull speed. Sloops couldn't be as large because there weren't strong enough materials available. Try making a single triangular sail with a sail area of over 500 sq. ft. from linen.

So a lot of smaller sails made sense. You could have a large ship with a good maximum hull speed, without your sails ripping apart with every gust of wind.

But you need A LOT of sailors to sail a tall ship: about 30 sailors in total to ie. reef down sails and operate the ship. That's really a lot.

Tall ships are used nowadays for racing, with the popular tall ship races traveling the world. Every four years I go and check them out when they are at Harlingen (which is very close to where I live).

Check out the amazing ships in this video of the tall ship races last year near my hometown. (The event was organized by friends of mine).

What is the difference between a schooner and a sloop? A schooner has two masts, whereas the sloop only has one. The schooner carries more sails, with a mainsail on both masts. Also, sloops are usually Bermuda-rigged, whereas schooners are usually gaff-rigged. Most schooners also carry one or two additional headsails, in contrast to the single jib of the sloop.

What do you call a two-masted sailboat? A two-masted sailboat is most likely a yawl, ketch, schooner, or brig. To determine which one it is you have to locate the mainmast (the tallest). At the rear: schooner or brig. In front: yawl or ketch. Brigs have a square-rigged foremast, schooners don't. Ketches carry a mainsail on the rear mast; yawls don't.

What is a sloop rig? A sloop rig is a sailboat with one mast and two sails: a mainsail and headsail. It's a simple sail plan that handles well and offers good upwind performance. The sloop rig can be sailed shorthanded and is able to sail very close to the wind, making it very popular. Most recreational sailboats use a sloop rig.

What is the difference between a ketch and a yawl? The most important difference between a ketch and a yawl are the position and height of the mizzenmast. The mizzenmast on a yawl is located aft of the rudder, is shorter than the mainmast and doesn't carry a mainsail. On a ketch, it's nearly as long as the mainmast and carries a mainsail.

There are a wonderful lots of DIY changeability shows on the cable airwaves these days.

Rick the rigger

There are SO many errors on this site it really should be taken down.

First major mistake is to say you are no longer afraid of the sea.

One that truly gets up my nose is the term ‘fully’ rigged ship. It’s a FULL rigged ship!! Your mast names are the wrong way round and just because there may be 3 it doesn’t automatically mean the one in the middle is the main.

I could go on and totally destroy your over inflated but fragile ego but I won’t. All I will say is go learn a lot more before posting.

Shawn Buckles

Thanks for your feedback. If you like to point out anything more specific, please let me know and I will update the articles. I’ve changed fully-rigged to full-rigged ship - which is a typo on my part. I try to be as concise as I can, but, obviously, we all make mistakes every now and then. The great thing about the internet is that we can learn from each other and update our knowledge together.

If you want to write yourself and share your knowledge, please consider applying as a writer for my blog by clicking on the top banner.

Thanks, Shawn

Well, I feel that I’ve learned a bit from this. The information is clear and well laid out. Is it accurate? I can’t see anything at odds with the little I knew before, except that I understood a xebec has a square rigged centre mainmast, such as the Pelican ( https://www.adventureundersail.com/ )

Hi, Shawn, You forgot (failed) to mention another type of rig? The oldest type of rig known and still functions today JUNK RIG!

Why are so many of the comments here negative. I think it is wonderful to share knowledge and learn together. I knew a little about the subject (I’m an Aubrey-Maturin fan!) but still found this clarified some things for me. I can’t comment therefore on the accuracy of the article, but it seems clear to me that the spirit of the author is positive. We owe you some more bonhomme I suggest Shawn.

As they say in the Navy: “BZ” - for a good article.

Been reading S.M. Stirling and wanted to understand the ship types he references. Thank you, very helpful.

This site is an awesome starting point for anyone who would like to get an overview of the subject. I am gratefull to Shawn for sharing - Thanks & Kudos to you! If the negative reviewers want to get a deeper technical knowledge that is accurate to the n-th then go study the appropriate material. Contribute rather than destroy another’s good work. Well done Shawn. Great job!

Good stuff Shawn - very helpful. As a novice, it’s too confusing to figure out in bits and pieces. Thanks for laying it out.

First of all I have to say that Rick ‘the rigger’ is obviously the one with the “over inflated but fragile ego” and I laughed when you suggested he share his knowledge on your blog, well played!

As for the content it’s great, hope to read more soon!

Alec Lowenthal

Shawn, I have a painting of a Spanish vessel, two masted, with. Lateen sails on both masts and a jib. The mainsail is ahead of the main mast (fore) and the other is aft of the mizzen mast. Would this be what you call lugger rig? I have not seen a similar picture. Thanks, Alec.

Thank you for your article I found easy to read and understand, and more importantly remember, which emphasises the well written.. Pity about the negative comments, but love your proactive responses!

This vessel, “SEBASTIAN” out of Garrucha, Almería, España, was painted by Gustave Gillman in 1899.

Sorry, picture not accepted!

Thank you for a very informative article. I sail a bit and am always looking for more knowledge. I like the way you put forth your info and I feel if you can’t say anything positive, then that person should have their own blog or keep their opinions to their-self. I will be looking for more from you. I salute your way of dealing with negative comments.

Thank you for a great intro to sailing boats! I searched different sailboats because I use old sails tp make bags and wanted to learn the difference. Way more than I ever expected. Thanks for all the work put in to teach the rest of us.

Your description of a cutter is lacking, and your illustrations of “cutters” are actually cutter-rigged sloops. On a true cutter, the mast is moved further aft (with more than 40% of the ship forward of the mast). A sloop uses tension in the backstay to tension the luff of the foresail. The cutter can’t do this.

Also, a bermuda-rigged ketch will have a line running from the top of the mainmast to the top of the mizzenmast.

wow great guide to rig types! thanks

Interesting guide, however I am confused about the description of the brig. You say the main mast on a brig can have a lateen sail, but in your picture it looks like a gaff sail to me. How is it a lateen sail?

Hi Shawn, thank you for taking the time to share this information. It is clear and very helpful. I am new to sailing and thinking of buying my own blue water yacht. The information you have supplied is very useful. I still am seeking more information on performance and safety. Please keep up the good work. Best Regards

mickey fanelli

I’m starting to repair a model sailboat used in the lake I have three masts that have long been broken off and the sails need replacement. So my question is there a special relationship between the three masts I do have reminents of where the masts should go. they all broke off the boat along with the sails I can figure out where they go because of the old glue marks but it makes no sense. or does it really matter on a model thank you mickey

Cool, total novice here. I have learnt a lot. Thanks for sharing - the diagrams along with the text make it really easy to understand, especially for a beginner who hasn’t even stepped on a sailing boat.

Daryl Beatt

Thank you. Cleared up quite a few things for me. For example, I was familiar with the names “Xebecs” and “Polaccas” from recent reading about the Barbary War. I had gathered that the two Barbary types were better suited to sailing in the Med, but perhaps they were less able to be adaptable to military uses,(but one might assume that would be ok if one plans to board and fight, as opposed to fight a running gun duel). Specifically, the strangely one sided August 1, 1801 battle between the USS Enterprise under Lt. John Sterett and the Polacca cruiser Tripoli under Admiral Rais Mahomet Rous. On paper both ships seemed nearly equal in size, guns and crew, but pictures of the battle are confusing. While the Enterprise is usually rendered as the familiar schooner, the polacca Tripoli has been pictured in radically different ways. Thus the Wikipedia picture by Hoff in 1878 used to illustrate the Battle shows a Brig design for Tripoli, indicating 77 years later, polaccas were no longer common.

Lee Christiansen

I am curious as to what you would call a modern race boat with a fractional jib,not equipped for full masthead hoist? Thanks Lee

Thanks Guy: The information and pictures really eliminate a lot of the mystery of the terminology and the meanings. Also appreciate the insight of the handling idiosyncrasies “hand” (staff) requirements to manage a vessel for one that has not been on the water much. I long to spend significant time afloat, but have concern about the ability to handle a vessel due to advancing age. The Significant Other prefers to sit (in AC comfort)and be entertained by parties of cruise line employees. Thanks again for the information.

Gordon Smith

Your discussion made no mention of the galleon, a vessel with either square-rigged Fore and Main masts and a shorter lateen-rigged Mizzen, or, on larger galleons, square-rigged Fore and Main masts, with a lateen-rigged Mizzen and a lateen-rigged Bonaventure mast, both shorter than either the Fore or Main masts. Also, it was not uncommon for a galleon to hoist a square-rigged bowsprit topsail in addition to the usual square-rigged spritsail.

Leave a comment

You may also like.

What's that sail for? Generally, I don't know. So I've come up with a system. I'll explain you everything there is to know about sails and rigs in this article.

17 Sailboat Types Explained: How To Recognize Them

Different Types of Sailing and Racing Explained

How Are Sail Numbers Assigned? (And how to pick yours)

The 15 Different Types Of Sailing Ships

The 15 types of sailing ships are listed below.

• The Schooner
• The Carrack
• The Brigantine
• The Barquentine
• The Clipper
• The Windjammer
• The Fully Rigged Ship

Throughout centuries, there have been many different types of sailing ships seen from harbors and coastlines around the world.

This article will show the various types of sailing vessels that have made their mark in maritime history and we showcase their purposes and why they are still remarkable feats of marine engineering.

The different sizes, shapes, and masts of the ships required different numbers of sailors to handle them and each type of ship was crafted with a different purpose in mind.

All ships are unique with no two types of ships being the same with each coming with its own experiences, features and requirements.

1. The Schooner

The Schooner sailing vessel, with an average size of 46m (152 feet) in length, was developed in the early 17th century and first used by the Dutch.

The ship came with fore and aft sails and they were created to operate in the toughest of wind and ocean conditions.

The Schooner was a multi-purpose sailing vessel used for transporting slaves to transporting cargo and it was used for fishing and racing too.

There are 5 different schooner types that are characterized by their rig configurations listed below.

• Tern schooner : This was a 3-masted schooner most popular between 1880 and 1920 capable of carrying up to 400 tons in cargo and it required a crew of 6-8 people
• 4-6 masts schooner : These schooners spread the sail area over smaller sails
• Grand Bank Fishing schooner : Similar to the famous Bluenose, it carries the main gaff topsail and a fisherman's staysail set between the masts.
• Square Topsail schooner : This was a combination of fore and aft sails and small square sails, most popularly used for coastal cargo transportation in the 1800s
• Coastal schooner : This was a coastal schooner sailing ship used for carrying goods and general cargo to nearby islands along the coast ( 1 )

The 19th Century schooner came with two or three masts, the one at the fore being shorter than the others.

Modern schooners, with Bermuda rigged sails, remain powerful, economical coastal liners traversing the Pacific.

Famous schooner sailing ships are listed below.

• America : The Schooner named " America " was designed for racing and it became the first winner of the America's Cup international sailing trophy ( 2 )
• Thomas W Lawson : The schooner “ Thomas W Lawson ” had a unique seven masts, with interchangeable sails and gear
• Wawona : The schooner " Wawona " was one of the largest lumber carriers and fishing vessels between 1897 and 1947

2. The Carrack

The Carrack, developed in the 14th and 15th centuries with the first built in Portugal, is a nautically-rigged wooden ship with three or four masts each having square sails or triangular sails and it was heavily used between the 14th to 15th Centuries and remained popular until the 18th Century. It is the sailing ship Christopher Columbus used to sail the world.

It was the largest ship in Europe with the Spanish Carrack being more than 1,000 tons in weight and 150 feet (45 meters) in length. More modern versions of the Carrack were developed by the Portuguese and they could hold up to 2,000 tons. ( 3 ).

The Carrack had 4 decks with the lower 2 used for cargo, the 3rd was for accommodation and the 4th was for cargo owned by the crew ( 4 ) and this bulky ship was the standard trading ship along the Baltic, Mediterranean, Asian, and Atlantic coasts in the mid-16th century useful for carrying cargo across seas.

The Carrack had a strange shape which made it cumbersome to sail close to the wind and after a lot of engineering experiments, parts of the ship were stripped off giving the ship a high stern and a low bow.

The modern Carrack features a square-rigged mainmast, foremast, and a latten-rigged Mizzen mast, along with a rounded stern, sizable bowsprit, forecastle, and aft castle.

This is a large ship, built to carry heavy freight for long-distance hauls since it was very steady even in the worst weather with the British Army calling it the “Great Ship” because of its highly-functional ship design.

Famous carrack shipping vessels are listed below.

• Santa Maria : This was the famous ship that Christopher Columbus used to sail and discover America in 1492
• Victoria : The first ship to circumnavigate the globe
• Grace Dieu : This was commissioned by King Henry V and it was one of the largest carrack ships in the world in 1418
• Cinco Chagas : This was presumed to be the richest ship at that time. it was sunk in battle in 1594 ( 5 )

3. The Brigantine

A Brigantine is a two-masted sailing ship with the main mast both a fore-and-aft main sail, a triangular type of sail and a square main topsail that came in various sizes ranging from 30 tons to 150 tons and it could carry a crew of up to 125 people but the shipping vessel could still be handled by a smaller crew if needed.

These ships were similar to the sailing vessel called the Brig as they both had top-gallant sails and were used by the Royal Navy to scout and monitor enemies on the high seas while also being popular amongst pirates as they were faster and easily maneuverable sailing vessels.

It is unclear when the ship was originally built with loose definitions date the ship back to the 13th century when it was originally referred to as the "sail and oar-driven war vessel" ( 6 ) and early academic definitions where the vessel was referred to as the "Brigantine" was first seen in books in the early to mid-16th century ( 7 ).

They would sail across the trade routes of the Baltics and Northern Europe, all the way from Germany to Scandinavia.

The mid-size ships had two sails on the-mainmast with a stripped-down fully-squared rig.

4. The Barquentine

The Barquentine, first built in the 17th century and also referred to as a " schooner barque ", " barkentine " or " schooner bark ", is a sailing ship similar to a barque but with only the foremast square-rigged and the remaining masts rigged fore and aft ( 9 ). They weighed 250 to 500 tons.

The Barquentine has three or more masts and square sails on the fore and aft masts with the main mast had topmast and gaff sails and these had been stripped down to facilitate operation by a slimmer crew and basic rig.

The Barquentine sailed the waters of Northern Europe which were dominated by variable wind speeds and they were popularly used to carry lumber from Scandinavia and Germany to England and the Baltic Areas.

5. The Xebec

The Xebec, also known as " Zebec ", a name derived from the Arabic word for "Small Ship", was a sailing ship built in the 16th to mid-19th century that was used mainly for moving cargo.

The Xebec sailing vessel held between 90 and 400 crew and was 103ft 9 inches in length with a tonnage of between 200 - 300 tons ( 10 ) and they were very agile and popular with European navies.

The features of the Xebec are listed below.

• Long-prow bulkheads
• Narrow elongated hulls
• Huge lateen yards
• One aft-set mizzen mast
• 3 lateen-pillared masts, both raked forward and having a single triangular sail

Their shallow draft and lateen rig allowed for a closer pinch to the wind allowing them to flee quickly or turn around and fire a broadside volley quickly.

After a lot of engineering experiments, the Xebec gave rise to the Polacre-Xebec, which replaced the mizzen mast. The mainmast of the new derivative also had a square rig and these new vessels were light and could not carry a heavy load with the shallow draft and low free-board making them unsuitable for open-seas sailing.

6. The Barque

The barque, also referred to as " barc " or " bark ", is a sailing ship first introduced in the 15th century ( 11 ) with 3 or more masts with square sails on all masts, except the aft or mizzen mast. It could carry approximately 500 tons and could hold a crew of 100 people.

Although they are quite similar, the barque should not be confused with the Schooner Bark which is a different vessel.

The Barque ship was commonly used by traders to carry extremely high volumes of cargo from Australia to Europe with cargo mainly consisting of Nitrates and Guano destined for the Western South American coast and they were popular in the period prior to the start of World War II.

7. The Clipper

A clipper was a sailing vessel introduced in the mid-19th century that was mainly used as a merchant ship for transporting goods and it was designed for speed.

Clipper ships ranged in size from a few hundred tons to over 4000 tons ( 12 ) and they all had a narrow build, a protruding stern, 3 to 5 masts for speed, and a square rig.

They were most commonly used by British and American traders to ship goods from China to their countries and they were also used to ferry Gold and Tea back to Great Britain and the Americas.

Famous clipper ships are listed below.

• Cisne Branco : This is a steel-hulled built like the original clipper. It is used as a training vessel by the Brazilian navy to this day
• Race Horse : This clipper ship set the record of getting from New York to San Francisco in 109 days in 1850 which was a record at that time
• Marco Polo : This clipper vessel was the first boat of the time to make around trip between England & Australia in under 6 months in 1852

8. The Windjammer

The Windjammer is a commercial sailing ship built in the 19th century with a capacity between 2,000 to 8,000 tons and the speed ranged from 14 to 21 knots ( 13 ).

It came with three to five square-rigged masts and it had a cost-effective extended hull that allowed for larger storage space.

It was a general-class merchant ship and was mainly used to transport bulky cargo and it ferried lumber, coal, and many other goods from one continent to another before evolving from carrying cargo to carrying passengers on cruises in later generations.

9. The Fluyt

The Fluyt, also known as " fleut " or " fluit " is a sailing ship that originated in the 16th century in the Dutch Republic with a weight between 200 and 300 tons, approximately 80 feet (24 meters) in length, and a crew capacity of 12 - 15 people ( 14 ).

The Fluyt has three squared-rigged masts and was primarily used as a merchant ship to transport cargo.

It was lightly fortified, had a small stern and extended box-style structure, and was crafted using specialized tools to reduce the costs of production and make them affordable to merchants.

10. The Fully-Rigged Ship

A fully rigged ship, also referred to as a "full-rigged ship", is a sailing ship with three or more masts, with all of the masts being square-rigged and the rig, hull, mast, and yards made of iron, wood, or steel.

A full-rigged ship weighed an average 325 tons and could carry a crew of up to 36 people and these ships required a larger crew because of their fully rigged construction ( 15 ).

During the 18th century, a full-rigged ship was also referred to as a " frigate " and they were mainly used for patrolling and for attacking.

A full-rigged ship weighed an average 325 tons and could carry a crew of up to 36 people ( 16 ).

However, towards the end of the 19th century, these ships were stripped down so they could be handled by a smaller crew which helped in easier handling of the sails during the monsoon period when winds would change speed and direction without any warning.

This helped in easier handling of the sails during the monsoon period when winds would change speed and direction without any warning.

A fully rigged ship masts from stern to bow consists of: ( 17 )

• Mainmast : This is the tallest mast on the ship
• Foremast : This is the second tallest mast on the ship
• Mizzenmast : This is the third tallest mast on the sailing vessel
• Jiggermast : If there is a 4th mast, it will be the jiggermast and will be the smallest mast on the ship

11. The Cutter

The cutter is a smaller sailing ship built in the early 18th century with a single mast rigged fore and aft and it varied in size from 20ft to 34 ft in length on average with a crew capacity of between 21 to 66 people ( 19 ).

A cutter sailing vessel features: ( 18 )

• Narrow hull
• 2 or more headsails
• Decked sailcraft
• Raking transom
• Vertical stem
• A gaff-rigged long bowsprit

This sailing ship was used for patrolling territorial waters and other enforcement activities during the 18th century and it was used to ferry soldiers and government officials because it was very fast and could outrun any enemy.

Modern-day cutters have a rugged appearance, are small and aptly fit into their intended purpose – speed and agility and the British Sailing Club still has open-oared cutters in their fleet of sailing ships.

12. The Yawl

A Yawl is a sailing ship that was originally that was originally a dutch ship nicknamed " Dandy " or " Jol " in Dutch built in the 19th century with a speed range from 10-14 knots, an average crew size of 25 people and a ship size ranging from 30ft to 75ft in length with beam sizes ranging from 10ft to 12ft.

They bore two fully-equipped masts and a fore-and-aft sail, a smaller jigger-mast and a mizzen mast that leans towards the rudder post of the ship with the mizzen sail in this case purposely designed to aid in balancing and trimming the ship on rough waters.

One famous yawl sailing ship is the Islander which was a 34ft yawl that Harry Pidgeon sailed around the world on. He was the second person in 1918 to sail around the world at that time.

13. The Brig

The brig is a two-masted sailing ship that was originally built in the 18th century with square rigging on both masts and sometimes had a spanker on the aft mast.

The length of a brig varied from 75ft to 165ft with tonnages up to 480 ith tonnages up to 480 and it needed a crew of 22 people ( 20 ).

The brig was used as a war vessel and a cargo ship for transporting goods and they were later used to ferry large cargo on the open seas since they could easily follow the direction of the prevailing winds.

It came with a berthing deck that had sleeping quarters for cabin crew and marine officials, storage areas, a sail bin, a wood-paneled stove room, guns, and carronades.

They would be brought into the harbor without using tugs and could maneuver well in small areas.

Famous brig ships are listed below.

• USS Argus : This was a United States Navy brig that fought in the First Barbary War, taking part in the blockage of Tripoli and the war of 1812
• USS Reprisal : This was the first ship of the United States Navy
• USS Somers : This was a brig in the United States Navy that became infamous for being the only US Navy ship to undergo a mutiny

14. The Ketch

A ketch is a two-masted sailboat that originated in the 17th century with most ketch ships ranging from 40ft to over 120ft in size and weighing between 100 and 250 tons. A ketch ship needed a smaller crew of only 4 people to operate ( 21 ).

The ketch looked just like the Yawl and as stated had two masts each having a fore-and-aft rig with the difference between the two being that the ketch had a mizzen mast placed on the taller mainmast but at a position in front of the rudder post. The mizzen in this case aided in maneuvering the vessel.

A ketch ship was used for:

• Cargo Transportation

15. The Hulk

A hulk is an 18th-century ship that is a derivative of the Carrack with a weight of 400 tons that is afloat but incapable of going to sea. In maritime terms, the name "Hulk" was given to ships that were outdated, stripped down or unprofitable to run.

The bulk of the hulk fleet was comprised of abandoned ships, stripped down and therefore could not continue to ply across the Mediterranean Sea as cargo or transport ships.

They are stationary and kept for their buoyancy and were used as a prison, a place for gambling.

• Maritime Museum Of The Atlantic. " Sailing Ship Rigs ".
• The New York Times. " America's Cup Held Here Since 1851 ", PDF.
• World History Encyclopedia. " Carrack Definition ," Paragraph 3.
• Same As Reference 3
• Military History. " Carracks, Famous Carracks ," Paragraph 9.
• " Aken, tjalken en kraken " by Hans Haalmeijer & Dirk Adrianus Vuik, Page 12.
• Google Books Ngram Viewer. " Brigantine ".
• Gaspee Info. " Brigentines Described ," Paragraph 3.
• Wikipedia. " Barquentine ," Paragraph 1.
• " Ship: 5000 Years Of Maritime Adventure " by Brian Lavery, Page 137.
• Oxford English Dictionary (Online Edition). " Barque ".
• University of Houston. " No. 338 Clipper Ship ". Paragraph 2
• Marine Insights. " Windjammer Sailing Ships: From Past to Present ". Paragraph 8
• History Today. " Dutch Shipbuilding in the Golden Age ". Volume 34, No. 1
• " The Story Of The Sea, Volume 1 " by Arthur Quiller-Couch, Page 20.
• Whaling Museum. " Rigs Of Vessel, Ship ," Paragraph 1.
• " A Dictionary of Sea Terms " by Anstead, A, Page 96.
• Britannia. " Cutter, Sailing Craft ". Paragraph 1.
• " The Boats Of Men Of War " by William May & Simon Stephens
• Texas Navy Association. " Glossary Of Nautical Terms ". Page 1
• National Museum Of American History. " Ship Model, Ketch ". Paragraph 1

Welcome aboard the sailing yacht Atlantic

All about one of the most awesome classic yachts of all time, the three mast schooner Atlantic. Long time holder of the world record for the crossing of the Atlantic Ocean under sail, this one hundred and eighty-five foot schooner originally designed by William Gardner in 1903 has been relaunched and is sailing once more.

The Atlantic is currently in the western Mediterranean, and available for luxury sailing yacht charters.

• Anchoring & Mooring
• Boat Anatomy
• Boat Culture
• Boat Equipment
• Boat Safety
• Sailing Techniques

Navigating the high seas: Three mast sailing ships

Vessels such as three mast sailing ships have been an integral part of maritime history and have played a pivotal role in the growth and development of trade and exploration. 

From the earliest wooden vessels to great clippers, sailing ships have evolved over the centuries, adapting to changing needs and improving technology. The many types of sailing vessels existing are less iconic than the three mast sailing ship.

These majestic vessels form a rich legacy in maritime history—a legacy born out of their impressive design specifications and construction processes, their unique daily life on board for crew members, some famous ships that are still remembered today, and much more. 

This article will explore the fascinating history of three masted sailing ships.

Key Takeaways

• There are two main types of three-masted ships: square-rigged sailing ships and fore-and-aft rigged sailing ships.
• Three-masted ships were used for long-distance voyages and coastal trading and fishing, while fore-and-aft rigged sailing ships were mainly used for shorter trips.
• The design and construction of three-masted ships were critical to their success, and shipbuilders used various materials, including wood, metal, and natural fibers.
• Daily life on board a three-masted ship was challenging, with cramped living conditions and limited food rations.
• Navigating a sailing ship was complex, requiring understanding of stars, winds, currents, and tides, as well as the use of instruments such as sextants, compasses, maps, and charts.
• The evolution of sailboats, including Schooner, Ketch, and Yawl boats, has been driven by the needs and desires of sailors and has led to faster, more aerodynamic vessels with added amenities for comfort.

Types of three masted ships

Square Rigged Sailing Ships are large, rectangular vessels characterised by large sails and yards suspended from masts. These ships are known for their stability and efficiency in windy conditions, making them ideal for long-distance voyages. 

Common types of Three-Mast Square Rigged Sailing Ships include the Bark, Barque, and Brig – all renowned for their durability, cargo capacity, and efficiency in rough seas.

Fore-and-aft rigged sailing ships are the opposite of square-rigged vessels; they have smaller and more flexible sails set parallel to the keel, making them more agile but slower than square-rigged boats. These ships were primarily used for shorter trips, such as coastal trading and fishing, with examples including Schooners, Ketches, and Yawls.

The primary purpose of these three mast sailing ships was to facilitate trade or exploration on long ocean voyages. Their ability to reach high speeds combined with their large cargo capacity made them ideal for travelling far distances safely. 

On the other hand, fore-and-aft rigged sailing ships were used mainly for coastal trading or fishing due to their smaller size and agility when navigating narrow channels or shallow waters.

Design and construction of three mast sailing ships

The design and construction of three mast sailing ships were critical to their success. Shipbuilders used various materials for sails and ropes, including wood, metal, and natural fibres. Wood was the most commonly used material, with different types of wood used for other parts of the ship. Metal was used for reinforcing key areas such as the rudder and keel, while sails and ropes were made from natural fibres such as hemp or flax. 

The design of three mast sailing ships incorporated several vital features, including the keel, rudder, and deck. The keel served as the ship’s backbone, providing stability, while the rudder allowed for steering. The deck was the main work area for storing supplies, handling cargo, and performing daily tasks.

Shipbuilding yards were typically located near waterways; constructing a ship could take several years. Skilled artisans, including carpenters, blacksmiths, and riggers, worked together using traditional techniques passed down over generations.

Life on a three mast sailing ship

Daily life on board a three-mast sailing ship was harsh and challenging , with cramped living conditions and limited food rations. The sailors worked long hours performing various tasks, including hoisting and trimming sails, steering the ship, and performing maintenance tasks.

Accommodations were limited, with most crew members sleeping in hammocks in the cramped quarters below deck. Meals were often simple and repetitive, consisting of salted meat, hardtack, and dried fruits and vegetables. However, the cook and stewards were still essential members of the crew responsible for feeding the crew and maintaining morale during long voyages.

The crew was divided into several distinct roles, each with its responsibilities and duties. The captain and officers were responsible for the overall operation, including navigation, voyage planning, and discipline. At the same time, sailors and deckhands formed the ship’s backbone and were responsible for hoisting sails, keeping watch, and other physical tasks. 

Navigation and voyage planning

Navigating a sailing ship was an intricate and complex task requiring understanding the stars, winds, currents, and tides. The captain and officers used instruments such as sextants, compasses, maps, and charts to plan their course and navigate the ship.

Weather patterns were also considered for voyage planning, as storms or rough seas could potentially slow or derail a voyage. The crew had to be prepared for any possible danger, including shipwrecks or attacks by pirates; therefore, careful precautions had to be taken.

Ports of call during a voyage were welcomed opportunities for rest, resupply, and trade. Sailing ships often carried goods, including spices, textiles, and precious metals, which they traded in ports along their journey. 

Famous three mast sailing ships

The Cutty Sark – Built-in 1869 in Scotland, The Cutty Sark was one of the last clipper ships to be built. It was designed for speed and used to transport tea from China to Britain in just over 80 days. The Cutty Sark is now preserved in a dry dock in London and serves as a museum where visitors can explore the ship and learn about its history.

The Flying Dutchman – A legendary ship said to be cursed and doomed to sail forever without making port; The Flying Dutchman has captured the imagination of people throughout centuries. Its tale of adventure has inspired many works of fiction, including the famous opera by Richard Wagner. 

The Star of India – Built in 1863 on Ramsey, Isle of Man, this beautiful three-mast sailing ship was initially used for cargo transportation between England and India before becoming a training ship for the British Merchant Navy. Nowadays, she is preserved in San Diego, California and is open for public tours.

The HMS Victory – Launched in 1765, is best known as Admiral Horatio Nelson’s flagship at the Battle of Trafalgar in 1805. It now serves as a museum ship in Portsmouth, England.

Still sailing: the legacy of three mast sailing ships

The legacy of three-mast sailing ships is still evident today, and many have been preserved and restored to serve as museums and tourist attractions. These ships are a symbol of maritime history and provide a glimpse into the life and times of sailors. They also remind us of the importance sailing ships had in global trade, commerce, and international relations during the 16th to 19th centuries.

These ships were built for long voyages and could carry a high volume of cargo, making them particularly suited to transporting goods between countries. They played an instrumental role in establishing trade routes and bringing new markets together, thereby contributing to the growth of economies and industries. 

Three mast sail ships also served another purpose: representing the power and prestige of their countries through flagships . Their voyages enabled the exchange of goods, ideas, and cultures across continents – essential for maintaining diplomatic relationships between nations when long-distance communication relied solely on sea transportation. 

Significance in cultural and social history

Three mast sailing ships have had an immense influence on cultural and social history. They were involved in some of the most significant moments of exploration and colonial expansion, often resulting in far-reaching consequences that continue to be felt today. 

Moreover, they have captured the imagination of artists, writers and filmmakers since ancient times; their romantic image has been depicted in countless works of art, literature and popular culture.

On top of that, these ships played a crucial role in developing seafaring technology and navigational practice. Their used advanced science and navigation, while their sailors’ experiences contributed to the emergence of new techniques and tools for sea travel. The legacy they left behind is now revered as a symbol of a bygone era – with many being used as educational resources to teach the history and science of maritime travel.

Modern-day uses of three mast sailing ships

Even though their use has declined, three-mast sailing ships remain a part of maritime heritage. They are used for various purposes, such as recreation and tourism. They make excellent tourist attractions, sometimes being restored and converted into museums – providing visitors with a unique insight into the world of seafaring.

Moreover, these ships are also utilised in educational programs wherein traditional sailing techniques and navigation are taught hands-on. These courses allow participants to experience life on the sea and learn about its rich history and culture.

Finally, three mast sailing ships are essential in preserving our maritime history and culture. Many organisations and groups strive to protect them by ensuring their continued maintenance – so that future generations can benefit from their legacy.

Evolution of schooner, ketch, and yawl boats

Throughout history, the evolution of sailboats has been driven by the needs and desires of sailors. From the three-mast ships of the early days to today’s modern Schooner, Ketch, and Yawl boats, the design and construction of these vessels have undergone a remarkable transformation.

In particular, the 19th and 20th centuries showed a significant shift in the use of sailboats – as they moved away from being primarily used for commercial purposes towards leisure and recreation. As such, boat designers began to pay more attention to making them aerodynamic to increase speed while adding cabins and other comforts to make them more suitable for leisurely outings.

Today’s Schooner, Ketch, and Yawl boats are among some of the most popular sailboats used; they are designed with speed and convenience in mind but also provide plenty of amenities for comfort. Thanks to lighter materials and advanced technology, these boats offer a faster sailing experience than ever – along with added strength and durability. 

In short – these boats represent a symbol of how far sailing technology has come in terms of design and utility – creating an unparalleled sailing experience for all who step onboard.

The three-masted sailing ships of our maritime past were undeniably impressive vessels in terms of design and functionality. They served as a primary means of transportation for goods and people for centuries, setting the standards for sailing vessels worldwide. Their construction and design techniques were intricate processes that drew on elements of tradition, innovation, and skill.

Today, these ships continue to captivate us with their sheer size and power while providing an exciting glimpse into the seafaring world. While they may not be used as often nowadays, they will always serve as a reminder of the legacy they left behind – demonstrating the strength, resilience, and hard work of sailors who persevered through difficult times and dangers to explore, trade, and spread culture throughout the world. 

Boom Vang Sailing Fundamentals

Reach new heights on a boat with a bosun chair, related posts, yacht vs boat: what is the difference, rib (rigid inflatable boat): a comprehensive guide, sib boat: a comprehensive guide.

• Cookie Policy
• Privacy Statement

© 2023 TIGERLILY GROUP LTD, 27 Old Gloucester Street, London, WC1N 3AX, UK. Registered Company in England & Wales. Company No. 14743614

Welcome Back!

Login to your account below

Remember Me

Retrieve your password

Please enter your username or email address to reset your password.

Add New Playlist

- Select Visibility - Public Private